Product Overview
No-fuss replacement for a freestanding wood burner
Simple modern lines, a glowing log set and realistic flame picture. The Novo Freestander will bring ambience and warmth to those cold winter nights. Choose from two base options, the cabinet (pictured to the right), or the plinth (pictured below).
Temperature control
Back-to-basics simple infrared remote makes operation easy and stress-free, or upgrade to Wi-Fi capability with our WIFI module kit.
Available for Natural Gas or ULPG, specify at the time of purchase
Lower right hand side of the base panel (in front on the gas control)
120 V AC 50 Hz 2-speed centrifugal blower
Brass ½ ” BSPT male fitting. The gas supply terminates inside the unit—lower RHS of the appliance.
230-240 V AC 50 Hz high voltage electronic spark
Room size, smaller rooms will heat up quickly, and due to the heat of the appliance, the fire will turn to a low setting once the set temperature has been reached.
Direct vent coaxial flue. Draws air for combustion from the outside and expels combusted gases to the outside. Appliance must be installed with a Rinnai flue system.
- inner Ø100 mm
- outer Ø170 mm
37-45 dB(A)
A 1.5 m power cord with a three pin plug is supplied. The power cord passes through a slot in the back left hand corner of the appliance.
Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detection.
Operated using a basic infra-red remote, or for more features such as timers and thermostatic control, by using a Wi-Fi module (purchased separately) and using the Rinnai Wi-Fi fireplace controller app.
Novo Cube = approx. 75 kg
Novo Freestander cabinet base = 20 kg
Novo Freestander plinth base = TBD
- Viewable glass dimensions: 530 x 294 mm
